The SUGON T3602 welding table works simultaneously in two stations and can be used for precision electronic repair of 210/115 handle welding heads
The SUGON T3602 welding table works simultaneously in two stations and can be used for precision electronic repair of 210/115 handle welding heads
SUGON T3602 Soldering Station 2 in 1 Iron. A/BAREA independent control. Button state, press and hold the CH1 button for about 3 seconds to turn on/off the buzzer sound.
SUGON T3602 Soldering Station 2 in 1 Iron. A/BAREA independent control. Button state, press and hold the CH1 button for about 3 seconds to turn on/off the buzzer sound.
SUGON T3602 Soldering Station 2 in 1 Iron. A/BAREA independent control. Button state, press and hold the CH1 button for about 3 seconds to turn on/off the buzzer sound.
The SUGON T3602 welding table works simultaneously in two stations and can be used for precision electronic repair of 210/115 handle welding heads
The SUGON T3602 welding table works simultaneously in two stations and can be used for precision electronic repair of 210/115 handle welding heads
SUGON T3602 Soldering Station 2 in 1 Iron. A/BAREA independent control. Button state, press and hold the CH1 button for about 3 seconds to turn on/off the buzzer sound.
SUGON T3602 Soldering Station 2 in 1 Iron. A/BAREA independent control. Button state, press and hold the CH1 button for about 3 seconds to turn on/off the buzzer sound.
SUGON T3602 Soldering Station 2 in 1 Iron. A/BAREA independent control. Button state, press and hold the CH1 button for about 3 seconds to turn on/off the buzzer sound.
The SUGON T3602 welding table works simultaneously in two stations and can be used for precision electronic repair of 210/115 handle welding heads

The SUGON T3602 welding table works simultaneously in two stations and can be used for precision electronic repair of 210/115 handle welding heads

SUGON
$270.14 USD

Features：

1.A/BAREA independent control.

 In the working state, long press the "SET" key in A/B area to enter the temperature calibration setting state interface.
 Press "▲▼" to adjust and correct the temperature. After setting, press the "SET" key again to save and exit the temperature calibration function, and enter the working state.

Note: A soldering iron corresponds to A "SET" key, and B soldering iron corresponds to B "SET" key.

2.T3602 needs less than 5% power to maintain a constant temperature of 300 degrees Celsius. The use of low power can extend the life of the soldering iron tip and reduce the consumption of the soldering iron tip. This is the careful design of sugon.

Specification：

Product volume weight:7kg

Model: SUGON T3602

Power Consumption: 240W

Input Voltage: AC 110V / AC 220V 50/60Hz

Range of Temperature: Decide by working mode(200℃-450℃ / 212°F-842°F)

Temperature Stability: ±2℃/Without air flow and no load

Tip to Ground Resistance: <1Ω(DC)

Tip to Ground Potential: <25mV(True RMS)